Stress

Mechanical stress describes the intensity of internal forces acting at a point on a plane of specified orientation. The traction vector can be decomposed into a normal component \(\sigma\) and a shear component \(\tau\).

For a centrally loaded prismatic bar, average normal stress is

\[\sigma=\frac{N}{A}\]

The SI unit is Pa = N/m²; MPa = N/mm² is common in engineering. In general, the stress state at a point is described by a tensor rather than a single scalar.

Stress is used to assess strength and the onset of yielding under tension, compression, bending, shear and torsion. Stress is distinct from force: force is measured in newtons, while stress is force per unit area. See normal stress and shear stress.

Learn more: Stress and Strain at a Point.